Connect CMD to the supplied AC adaptor plug the AC Adaptor to a an electrical outlet.ħ. If you are using BDM or BOOT Mode Remove the ecu from the vehicle, open it and position it on the benchĦ. Start CMD software and follow desired procedure (read/write)ĥ. Connect CMD Flash tool with the OBD cable to your vehicle OBD portĤ. Connect CMD Flash tool with the USB cableģ. RSA and SEED/KEY Online SERVER service+ How to use it Basic procedure stepsĢ. New Ecus implementation, New checksums implementation Tricore boot interface, mpc004 probe, Mercedes/Volvo boot cable, universal boot cable.Cables, adapters, power supply 110/220V.OBD protocols for cars with checksums (no industrial vehicles).this procedure requires flashing the ECU out of the car.mainly used from 2008 on where some cars have the new tuning protection.Flashtec also provide cables for the ECUs like Mercedes EDC17 (with the pads placed on the other side of the pcb) you don't need to extract the pcb from the case.

you just need the new provided EDC17 positioning frame probe, and sometimes some connectors will be required on the front ECU connectors.

for all the EDC17 ECUs with the Bosch pads on the board ( like the old EDC16 BDM ).

mainly used on some ecu types that couldn't be done via OBD from 2000-2008 (this plugin is not used much any more, but is required to flash some ECU's)īOOT MODE (For BOSCH MEDC17 Tricore locked ECUs with tuning protection).

using the BDM port is the most stable way to flash the ECU because the ECU receives a steady 12V, and can be flashed over and over again.flashing via BDM port requires opening the ECU and connecting a probe on a BDM communication port that is located on the motherboard of the ECU.this is the fastest way and most of the cars from 2000-2008 can be done this wayīDM (directly connecting to ECU, older ECU models).the car should always receive a stable 12V connection to the battery.flashing via OBD requires connection of the CMD cable to the OBD diagnostic plug.CMD Flash - WinOLS Connector Total flexibility via options and pluginsĬMD Flash can be used as a OBD flashing tool only or as a BDM or BOOT tool for bench work: Recovery function (you can restart ECU flashing after a programming faliure ) The CMD flash tool is available in the master and slave versions. With this tool, you are able to flash the most of all European and Korean OBD diesel vehicles. The big advantage is that the control device is not openene and there is no soldering needed. The CMD-Flash is a tool which allows you to read and to write ECU data over OBD port. It is particularly suitable for diesel vehicles and is easy and safe to use. The Flash tool CMD is one of the best tools on the market.

Winols tutorial